FT-2000D 200W version

The FT-2000 and FT-2000D provide a full 100 & 200 Watts
of power output (AM: 25 W) on the 160-6 Meter Amateur bands,
and the U.S. version includes a special memory bank containing
the five 60-meter channels, as well.

Continuous receiver coverage from 30 kHz to 60 MHz is provided.

Note: frequency coverage may differ in your country.

The power of IF Digital Signal Processing (DSP) is yours to enjoy
with the FT-2000/D. Variable IF Width and IF Shift allow precise
interference rejection, and the receiver DSP also includes an
Auto-Notch, Manual Notch, Digital Noise Reduction, and a
continuously-variable passband Contour control.

The WIDTH control has a mode-determined adjustment range
of 200 Hz – 4 kHz for SSB, and 25 Hz to 2.4 kHz on CW, and
a mode-optimized “Narrow” key provides one-touch narrowing
of the bandwidth to a user-determined preset value.

With the FT-2000/D, you have tremendous control over the
fidelity and/or “talk power” of your SSB signal, thanks to the
variable SSB bandwidth capability in the Menu. The default
bandwidth is 2.4 kHz (300 – 2400 Hz @ -6 dB), but you also
have selections of 50 – 3000 Hz, 100 – 2900 Hz, 200 – 2800
Hz, and 400 – 2600 Hz, allowing you to select the bandwidth
best suiting your operating needs.

The power of DSP also provides tremendous benefits for
transmission, as well as reception. The Three-Band Parametric
Microphone Equalizer allows unmatched capability to tailor your
speech characteristics: in each of the three bands, you may adjust
the center frequency of the equalization, the frequency spread
over which the equalization is applied, and the amplitude
(peaking or nulling) within that equalization range.
The result is sparkling, clear audio that will be the envy of
everyone else on the band!

Following in the renowned path of the FTDX9000, the FT-2000/D
is crafted with a comprehensive design view that accounts for
all aspects of the strong signal environment, and especially with
optimization of weak-signal in a multiple-strong-signal environment.

The receiver of the FT-2000/D is a triple-conversion type, utilizing
great care in the gain distribution through all IF stages. The first
mixer is a GaAs FET Doubly-Balanced Mixer type, fed by a
four-VCO PLL synthesizer (30 kHz – 10.5 MHz, 10.5 MHz – 24 MHz,
24 MHz – 39 MHz, and 39 MHz – 56 MHz). The resulting first IF
is at 69.450 MHz, utilizing an up-conversion technique that yields
excellent image rejection.

The first IF of the FT-2000/D features three roofing filters,
I bandwidths of 15 kHz, 6 kHz, and 3 kHz, optimized by mode
for best performance on today’s crowded bands. Especially useful
during busy contest weekends, the Roofing Filters are positioned
right after the first mixer, improving IP3 (3rd-Order Intercept Point)
performance for all stages that follow.

On the lower Amateur bands, the signal voltages impinging on
a receiver can create noise and Intermodulation effects that can
cover up weak signals you’re trying to pull through. So YAESU’s
engineers developed the µ (Mu) Tuning system for the FTDX9000,
and it’s now available as an option for the FT-2000/D. Three modules
are available (MTU-160, MTU-80/40, MTU-30/20), and these modules
may be connected externally with no internal modification required!
When µ-Tuning is engaged, the standard VRF (Variable RF Preselector)
system is bypassed, but the fixed Bandpass Filters are still in the received
signal path.

The µ-Tuning filters utilize a stack of large 1.1” (28 mm) Ni-Zn Ferrite cores,
driven through a silver-plated coil assembly by a precision stepper motor.
The resulting high Q (typically over 300) provides a very steep resonance
peak near your operating frequency. The peak may be adjusted away
from your frequency, for even greater protection from a specific station,
and a graphical depiction of the µ-Tune filter alignment appears on the
front panel of the transceiver.

When operating at a frantic pace, it’s a comfort to have such comprehensive
information available on the front panel’s huge display. The FT-2000/D’s
unique "Receiver Configuration Display” calls out status for each step in
the receiver’s RF and IF, and the fluorescent display also provides both
graphical and numerical depiction of the bandwidth and the alignment of the
various interference-rejection filters. And the high-resolution analog
multi-meter allows you to monitor PO/COMP/SWR/ID/VDD/ALC both
effortlessly and precisely.

During Split operation, Dual Receive may be engaged so that you may listen
to both sides of the pile-up (or watch a particular frequency on the same
band for activity). One push of the appropriate [TX] or [RX] indicator will
engage or disengage the receiver or transmitter on the Main or Sub VFO,
and the [TXW] (TX Watch) button also lets you listen to your transmit
frequency during casual Split operation. The Sub Receiver also has a slot
for an optional Collins® Mechanical CW filter, if desired: choose the
YF-122C (500 Hz) or the YF-122CN (300 Hz). The Sub Receiver is an
analog type, with no DSP filters.

A wide array of informative and useful displays, identical to those available
on the FTDX9000D, can be obtained by adding the optional DMU-2000 Data
Management Unit and an after-market display (not supplied). You get an
Audio Scope (plus “Waterfall”) and Oscilloscope, Logging Page, Band Scope,
World Clock with Sunrise/Sunset Terminator Display, Swept-frequency
SWR display, Memory Channel listing, Rotator Control display with Great
Circle Map, and a comprehensive Menu listing, as well. Enjoy the ultimate
in operating ease by adding the DMU-2000!

The 99 memories may be organized into up to five memory groups
(up to 20 channels each), and with the addition of the optional
DMU-2000 Data Management Unit, you can connect your keyboard
(not supplied) and add memory labels (names), edit data, and perform
backup and other functions, as well, using an external computer monitor
(not supplied).

In addition, the one-touch Store (STO) and Recall (RCL) keys allow
you instant access to a five-channel Quick Memory Bank that gives
you access to five frequencies on a first-in, first-out running basis.

The front and rear panels have their own key jacks, which may be
set up independently for connection of a keyer paddle (for use with
the internal keyer), a straight key or bug, or a computer-driven keying
interface for use with contest logging software, etc.

With the FT-2000/D, you can use both your ears and your eyes to
zero in on another CW station. The CW SPOT switch engages a
spotting tone that matches the offset of your transmitted signal
(as set by the CW Pitch selection), allowing you to match that
pitch to that of an incoming signal perfectly. And the CW Tuning
Indicator provides a graphical depiction of the tuning process,
with a ? marker lighting up when the incoming signal is precisely
aligned with yours.

For storage and playback of repetitive messages you have to transmit
in a contest, the four-channel Digital Voice Recorder (5 channels when
using the optional FH-2 Keypad) will quickly and efficiently let you
store CQ, Contest Number, and “QRZ” messages. On receive,
a running 15-second loop recorder lets you stop the recording and
play back the just-received audio, so you can confirm a callsign,
for example.

The front panel’s oversized 2.67” (68 mm) Main Tuning Knob is
crafted using a brass JISC3604R alloy, for easy flywheel-effect
frequency excursions or precision tuning of weak digital signals.
The torque of the tuning knob shaft may be adjusted for just the
amount of drag you prefer, and all it will take is one spin of the
dial for you to know that you are in command of a serious radio!

The 100 memories of matching-point data allow you to tune around
the bands without the need to re-tune as you go. The special antenna
tuner memories ensure efficient operation, as well as lightning-fast
matching at new operating frequencies, as needed.

The Automatic Antenna Tuner has a matching range of 16.7 to 150
Ohms (50 MHz: 25 - 100 Ohms).

Just go to the "Files" tab in this area, and look for the "PCC-2000-E" Zip
File. Download it for free, and enjoy your "virtual front panel" of the
FT-2000/D on your computer screen.

Flexible Connection Points for RTTY, SSTV, PSK31, JT65 (EME)
and other Digital Modes; VOX (Automatic voice-operated TX/RX
control); All mode Squelch; FM Mode: 50-Tone CTCSS Encode/
Decode System; Band-Specific Repeater Shifts for 29/50 MHz FM;
Wide/Narrow modes for AM and FM; Flexible, easy-to-use VFO/
Memory command selections: A>B, A=B, V/M, M>A, A>M; Memory
Channel Offset Tuning (MT); Versatile Scanning Capability; Versatile
Menu Mode for customization of setup and features; Transverter Jack;
Constant-level rear-panel sound recording jack; Comprehensive external
RS-232C computer control (CAT) protocol; Optional FH-2 Keypad
provides ease of control for CW or Voice Messages and Receiver
Loop recording.